Brother HL-2290 - If You Replace the Low-Voltage Power Supply Pcb Assy; Reset Irregular Power Supply Detection Counter of the Low-Voltage Power Supply PCB

4-9
Confidential
2. IF YOU REPLACE THE LOW-VOLTAGE
POWER SUPPLY PCB ASSY
 What to do after replacement
• Reset Irregular Power Supply Detection Counter of the Low-voltage Power Supply PCB
 What you need to prepare
None
2.1 Reset Irregular Power Supply Detection Counter of the
Low-voltage Power Supply PCB
LED models
Refer to “1.4.14 Reset irregular power supply detection counter of low-voltage power supply
PCB” in Chapter 5 to reset the irregular power supply detection counter.
LCD models
Refer to “1.3.21 Reset irregular power supply detection counter of low-voltage power supply
PCB (Function code 88)” in Chapter 5 to reset the irregular power supply detection counter.