Confidential
2-25
(2) Turn the Roller holder ASSY to the direction of the arrow 2a, push the Lift arm to the
direction of the arrow 2b and fix the Boss of the Roller holder ASSY into the hole of the Lift
arm.
Note:
Check whether the Lift arm is moved by putting the Roller holder upwards. If the Lift arm is
not moved, it is not assembled correctly.
Fig. 2-44
(3) Close the Front door unit ASSY.
(4) Assemble the Separation pad spring. Put the positioning section of the Separation pad
ASSY into the spring and catch the two Hooks.
Fig. 2-45
Paper feed frame unit
Paper feed frame unit
Roller holder ASSY
Boss
Lift arm
2a
2b
<Front side>
Separation pad ASSY
Hook
Hook
Paper tray
<Front side>
Separation pad spring
Positioning section
To Next Page
Loading...
