What to do if my Brother HL-4140CN says 'No Toner'?
If your Brother Printer displays 'No Toner', it means the toner cartridge for the color indicated on the LCD screen isn't installed correctly. To fix this, pull out the drum unit, remove the indicated toner cartridge, and then reinsert it back into the drum unit.
How to fix 'Drum Error' on my Brother HL-4140CN Printer?
If your Brother Printer shows a 'Drum Error', it indicates that the corona wire on the drum unit needs cleaning. Clean the corona wire on the drum unit to resolve this issue.
How to fix 'Replace Parts Drum' message on Brother HL-4140CN Printer?
If your Brother Printer is displaying 'Replace Parts Drum', it indicates that it is time to replace the drum unit. Replace the drum unit to resolve this issue.
What to do if my Brother HL-4140CN says 'Cover is Open'?
If you see 'Cover is Open' on your Brother Printer, it means the front cover, ADF cover, or fuser cover isn't completely closed, or paper was jammed when you turned it on. Make sure to close the front cover, ADF cover, and fuser cover properly. If there was a paper jam, remove the jammed paper, close the fuser cover, and then press Mono Start or Colour Start.
What to do if my Brother HL-4140CN shows 'Toner Error'?
If your Brother Printer displays 'Toner Error', it signifies that one or more toner cartridges are not installed correctly. To resolve this, pull out the drum unit, remove all the toner cartridges, and then reinsert them back into the drum unit.
How to fix 'Replace Parts Belt Unit' message on Brother HL-4140CN Printer?
If your Brother Printer displays 'Replace Parts Belt Unit', it means it is time to replace the belt unit. Replace the belt unit to resolve this issue.
How to fix 'Drum Stop' message on Brother HL-4140CN?
If your Brother Printer shows 'Drum Stop', it means it is time to replace the drum unit. Replace the drum unit.
What to do if my Brother HL-4140CN Printer says 'No Belt Unit'?
If your Brother Printer is displaying 'No Belt Unit', it means that the belt unit is not installed correctly. Re-install the belt unit to resolve this.
How to fix 'Fuser Error' on my Brother HL-4140CN Printer?
If your Brother Printer displays 'Fuser Error', it means the fuser unit's temperature isn't rising to the specified level within the needed time. Turn the power off, wait a few seconds, and then turn it back on. Leave the machine on for 15 minutes.
Why does my Brother Printer say 'Cooling Down Wait for a while'?
If your Brother Printer shows 'Cooling Down Wait for a while', the drum unit or toner cartridge is too hot. Ensure the fan is spinning and the exhaust outlet isn't blocked. If the fan works, clear any obstructions around the exhaust and let the machine sit for several minutes. If the fan doesn’t spin, disconnect the power for several minutes, then reconnect it.
General| Color | Yes |
|---|---|
| N-up printing | 4, 16, 25 |
| Duplex printing | No |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (color, normal) | 16 s |
| Print speed (black, normal quality, A4/US Letter) | 22 ppm |
| Memory slots | 1 |
| Processor family | Star Sapphire |
| Maximum internal memory | 384 MB |
| Sound power level (standby) | 33 dB |
| Sound pressure level (printing) | 57 dB |
| Total input capacity | 300 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 500 sheets |
| Maximum number of input trays | 2 |
| Multi-Purpose tray input capacity | 50 sheets |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Recycled paper |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Sustainability certificates | ENERGY STAR |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 65 W |
| Power consumption (printing) | 560 W |
| Power consumption (PowerSave) | 0.9 W |
| Display | LCD |
| Printing colors | Black, Cyan, Magenta, Yellow |
| Maximum duty cycle | - pages per month |
| Number of print cartridges | 4 |
| Page description languages | BR-Script 3, PCL 6 |
| Standard interfaces | Ethernet, USB 2.0 |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Server operating systems supported | Windows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Windows operating systems supported | Windows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Package weight | 25.500 g |
Weight and Dimensions| Dimensions (WxDxH) | 410 x 486 x 313 mm |
|---|
To Next Page
