EasyManua.ls Logo

Brother  HL-4140CN - Packing and Shipping the Machine

Brother HL-4140CN
315 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
Packing and shipping
the machine A
WARNING
This machine is heavy and weighs
approximately 28.5 kg. To prevent possible
injuries at least two people should lift the
machine. Be careful not to pinch your
fingers when you put the machine down.
If you use a Lower Tray, carry it separately
from your machine.
IMPORTANT
When shipping the machine, the waste
toner box must be removed from the
machine and put in a plastic bag, and then
sealed. Failure to remove it and put it in a
plastic bag before shipping may cause
severe damage to the machine and may
void the warranty.
Note
If for any reason you must ship your
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
Make sure that you have the following parts
for repacking:
1 Plastic bag for the waste toner box
2 Orange packing materials for locking the
internal parts (4 pieces)
3 A piece of paper (A4 or Letter) to protect the
belt unit (Please supply this yourself)
1
2
3

Table of Contents

Other manuals for Brother  HL-4140CN

Related product manuals