Brother HL-4140CN - Setting the Fax Receive Stamp (Black & White Only); Setting the Print Density

Receiving a fax
33
4
Setting the Fax Receive
Stamp (black & white only) 4
You can set the machine to print the received
date and time in the top centre of each
received fax page.
a Press MENU.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Setup Receive.
Press Setup Receive.
d Press a or b to display Fax Rx Stamp.
Press Fax Rx Stamp.
e Press On or Off.
f Press Stop/Exit.
Note
• The received time and date will not appear
when using Internet Fax.
• Make sure you have set the current date
and time in the machine. (See the Quick
Setup Guide.)
Setting the Print Density 4
You can adjust the Print Density setting to
make your printed pages darker or lighter.
a Press MENU.
b Press a or b to display Fax.
Press Fax.
c Press a or b to display
Setup Receive.
Press Setup Receive.
d Press a or b to display
Print Density.
Press Print Density.
e Press c to make the print darker.
Or, press d to make the print lighter.
Press OK.
f Press Stop/Exit.