Brother HL-4050CDN - Page 166

Confidential
3-58
(6) Remove the five bind B M3x8 Taptite screws, and then remove the PF plate from the
Paper feed frame.
Fig. 3-65
(7) Release the Hook of the Separation roller bush to remove it. Then, remove the Separation
roller drive shaft.
Fig. 3-66
Taptite, bind B M3X8
Taptite, bind B M3X8
Taptite, bind B M3X8
Paper feed frame
PF plate
Hook
Separation roller bush
Separation roller drive shaft
Paper feed frame
<Upper side>