Brother HL-4050CDN - Page 202

Confidential
3-94
(3) Disconnect the two flat cables (CN1, CN4) and connector (CN8) from the Laser unit.
Fig. 3-133
(4) Remove the seven cup S M3x6 SR Taptite screws, and then remove the four Scanner
holders and Laser unit.
Fig. 3-134
Laser unit
Scanner holder
Taptite, cup S M3x6 SR
Laser unit
Scanner holder
Frame unit
Taptite, cup S M3x6 SR
Taptite, cup S M3x6 SR
Scanner holder
Scanner holder
Taptite, cup S M3x6 SR
<Front side>
<Front side>