Brother HL-4050CDN - Page 218

Confidential
3-110
(2) Remove the bind B M3x8 Taptite screw, and then remove the Toner sensor PCB ASSY K
(TE/NEW) from the Frame unit.
(3) Remove the cup B M3x8 Taptite screw, and then remove the TE protect film 2 and Toner
sensor PCB ASSY Y (TE/NEW) from the Frame unit.
(4) Remove the bind B M3x8 Taptite screw, and then remove the Toner sensor PCB ASSY M
(TE/NEW) from the Frame unit.
(5) Remove the bind B M3x8 Taptite screw, and then remove the Toner sensor PCB ASSY C
(TE/NEW) from the Frame unit.
Fig. 3-162
Frame unit
Toner sensor PCB
A
SSY K (TE/NEW)
Taptite, bind B M3X8
Toner sensor PCB ASSY Y
(TE/NEW)
TE protect film 2
Taptite, cup B M3X8
Toner sensor PCB ASSY M
(TE/NEW)
Taptite, bind B M3X8
Taptite, bind B M3X8
Toner sensor PCB ASSY C
(TE/NEW)
<Left side>