Wireless configuration for Windows
®
using the Brother automatic installer application
61
4
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Follow the on-screen instructions for entering the Name (SSID) and the Channel number. Go to
p.
n If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to q.
o If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless printer, you must ensure that it is configured to match the
Authentication and Encryption settings of your existing wireless network. Choose the
Authentication Method and Encryption Mode from the pull-downs in each setting box. Then enter the
Network key and click Next. Go to q.
To Next Page
Loading...
