6 - 17 NOVELL NETWARE PRINTING
13
Make sure that the new printer name is highlighted, and then
press ENTER. You will be shown the Printer Configuration
Window.
14
Select Print Queues Assigned: (See List), and then press
ENTER.
The list of print queues will be empty, since none has been
selected.
15
Press INSERT to get a list of the print queues and select the
print queue name which you entered in Step 7.
16
Press ESCAPE several times and go back to the Available
Options menu.
17
Select print servers and select the name of the print server that
you entered in Step 4.
18
Highlight the Printers option in the print server Information
menu.
19
Press INSERT and select the name of the printer you entered in
Step 12.
20
Press ESCAPE several times to return to DOS.
21
Execute the BRCONFIG from the Windows
®
menu.
Select the print server from the list of print servers. When you
get the message that the print server is connected, press the
ENTER key and type the default password of access in
response to the # prompt (the password will not echo), and then
press the ENTER key again in response to the ENTER
Username> prompt. When you get the Local> prompt, type:
SET SERVICE service TREE tree
SET SERVICE service CONTEXT Context
■ Where tree is the NDS tree name.
■ Where context is the name of context where the print server
resides.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
