6 - 19 NOVELL NETWARE PRINTING
5
Press INSERT, type in the desired print queue name (with
NetWare 4.1x, you will also be asked for a volume name; press
INSERT and select the appropriate volume), and press
ESCAPE to return to the main menu.
The following steps apply to configuring a remote printer with
NDS support on NetWare 4.1x systems:
6
a
Select print servers from the PCONSOLE menu and then
select the print server name of the PSERVER NLM on your
file server.
b
Select Printers.
c
Press INSERT to get Object, Class menu.
d
Press INSERT and enter the Printer Name (any unique name
is OK).
e
Highlight the printer name and press ENTER twice to get to
the Printer Configuration Menu.
f
PCONSOLE will assign a Printer Number. Remember this
number, since it will be used later.
g
Highlight Print Queues Assigned and press ENTER and
then INSERT to get a list of available queues.
h
Highlight the name of the print queue you wish to assign to the
remote printer and press ENTER.
i
The other settings in the menu are not required. Push
ESCAPE several times to exit PCONSOLE.
j
Skip to the Assigning the remote printer name and
number sections below.
To Next Page
Loading...
