For Network Users
48
1
BRAdmin Professional configuration utility (For Windows
®
users)
The BRAdmin Professional utility for Windows
®
is designed to manage your Brother network connected devices
in a Local Area Network (LAN) environment. For more information on BRAdmin Professional, visit us at
http://solutions.brother.com
.
Installing the BRAdmin Professional
configuration utility
1 Click Install Other Drivers or Utilities on the
menu screen.
2 Click BRAdmin Professional and follow the
on-screen instructions.
Note
The default password for the print server is
‘access’. You can use BRAdmin Professional to
change this password.
Setting your IP address, Subnet Mask and
Gateway using BRAdmin Professional
Note
If you have a DHCP/BOOTP/RARP server in your
network, you don’t have to do the following
operation. Because the print server will
automatically obtain its IP address.
1 Start BRAdmin Professional, and choose
TCP/IP.
2 Click Devices, then Search Active Devices.
BRAdmin searchs for new devices
automatically.
3 Double-click the new device.
4 Enter the IP Address, Subnet Mask and
Gateway, and then click OK.
5 The address information will be saved to the
printer.
To Next Page
Loading...
Need help?
General