Setting Up the Machine
9
STEP 1
1
1 Put the CD-ROM into the CD-ROM drive
For Windows
®
users
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done when
installing the driver.
1 Put the supplied CD-ROM into your CD-ROM
drive. The opening screen will appear
automatically.
Choose your printer model and the language.
2 Click Initial Setup on the menu screen.
3 You can view the initial setup instructions and
follow along with the steps on pages 10 to 12.
For Macintosh
®
users
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done when
installing the driver.
1 For Mac OS
®
9.1 to 9.2 Users, go to next page.
For Mac OS
®
10.2.4 or greater Users, put the
supplied CD-ROM into your CD-ROM drive,
and then double-click the HL5200 icon on your
desktop. Double-click the Start Here OS X
icon. Follow the on-screen instructions.
2 Click Initial Setup on the menu screen.
3 You can view the initial setup instructions and
follow along with the steps on pages 10 to 12.
To Next Page
Loading...
