Driver and Software
63
3
Sleep Time
When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the printer acts as though it were turned off. The default setting for timeout is 1 minute. If you want to
change the sleep time, choose Manual and then enter the time in the text box on the driver.
While the printer is in sleep mode, Back light is off, the LCD shows SLEEP, but the printer can still receive
data. Receiving a print file or document or pressing Go will automatically wake up the printer to start
printing.
For more information about Sleep Time setting change, please visit the product page at
http://solutions.brother.com/
and see "Information".
Support
Brother Solutions Center
The Brother Solutions Center (http://solutions.brother.com/
) is a website offering information about your
Brother product including FAQs (Frequently Asked Questions), User’s Guides, driver updates and tips
for using your printer.
Visit the Genuine Supplies website
You can visit our website for original/genuine Brother supplies by clicking this button.
To Next Page
Loading...
