Brother HL-L2300d Series User Guide

Troubleshooting
9
A
Enabling/Disabling AirPrint using Web Based Management
(web browser) A
A standard web browser can be used to enable and disable the machine's AirPrint feature (it is enabled by
default).
a Confirm that the machine is connected to the same network as the computer.
b Open the web browser on your computer.
c Type “http://machine's IP address/” into your browser’s address bar (where “machine's IP address” is
your machine’s IP address).
 For example:
http://192.168.1.2/
NOTE
Your machine’s IP address is visible on its control panel under the Network menu. For more information,
see your Brother machine's Online User's Guide on your model’s Manuals page on the Brother Solutions
Center at http://support.brother.com/.
d If you have set a login password for Web Based Management, type the password in the Login box, and
then click .
e Click Network.
f Click Protocol in the left navigation bar.
g To disable AirPrint, deselect the AirPrint check box.
To enable AirPrint, select the AirPrint check box.
h Click Submit.
i Restart your Brother machine.

Brother HL-L2300d Series Specifications

General

Functions	Print
Standard Paper Capacity (sheets)	250
Standard Interface(s)	USB 2.0
Print Resolution (maximum dpi)	2400 x 600 dpi
Recommended Monthly Print Volume	250 - 2, 000 pages
Operating System Compatibility	Windows, Mac, Linux