Brother HL-L2370DN - Change Continue;Stop Mode for Toner Cartridge (LED Models Only)

5-58
Confidential
2.8 Change Continue/Stop Mode for Toner Cartridge
(LED models only)
<Function>
This function is used to change the toner setting to continuous printing mode which allows
you to use the current toner cartridge even the LED is prompting toner replacement.
<Operating Procedure>
(1) Press the [Go] seven times while the machine is in the ready state. All LEDs light.
The number of flashes after pressing the [Go] seven times indicates the machine is in
the continue mode or stop mode.
All LEDs flash once: Stop mode
All LEDs flash twice: Continue mode