2-22
Confidential
Jam Inside Open the Front
Cover, pull out the
Drum Unit
completely and
remove the jammed
paper.
After the registration rear sensor
detects paper pass, the eject
sensor does not detect paper
pass.
7000 2-44
Jam MP Tray Remove the
jammed paper from
MP Tray and press
Go.
When the paper is fed from the
MP tray, after the MP paper
empty sensor detects paper
pass, the registration rear
sensor does not detect paper
pass after a set period of time.
7200 2-45
Jam Rear Open the Back
Cover and remove
the jammed paper,
then press Go.
After the registration rear sensor
detects the end of paper pass
and the specified period of time
has passed, the eject sensor
continues to detect paper pass.
7100 2-45
Jam Tray 1 Remove the
jammed paper from
Tray 1.
When printing from the paper
tray, the registration front sensor
does not detect paper pass
within the specified time after
the T1 paper feed sensor
detected paper pass.
7302 2-46
Machine Error
F9
-
The spec code was not entered
correctly.
F900 2-52
Manual Feed Load #S paper.
There is no paper set in the
manual feed slot on the manual
feed slot printing.
8C00 2-48
Media
Mismatch
Reload correct
paper in MP Tray,
then press Go.
When printing from the MP tray,
paper type setting in the
machine does not match the
setting in the driver.
9201 2-48
Reload correct
paper in Tray 1, then
press Go.
When printing from the paper
tray, paper type setting in the
machine does not match the
setting in the driver.
9202 2-48
No Cartridge Put the Toner
Cartridge back in.
Toner cartridge could not
communicate with the cartridge
sensor.
2500 2-37
No Drum Unit Open the Front
Cover, then install
the Drum Unit.
Detected that the drum unit was
not set by detecting the
electrodes current.
6200 2-41
No Paper Reload paper in
Tray.
Detected that there was no
paper set in all trays when
TrayAuto was selected for
printing.
9309 2-50
Error message
Description
Error
codes
Refer
to:
Initial display Scroll
To Next Page
Loading...
