Brother IntelliFax-2840 Advanced User's Guide

46
A
Cleaning the machine A
Clean the outside and inside of the machine
regularly with a dry, lint-free cloth. When you
replace the toner cartridge or the drum unit,
make sure that you clean the inside of the
machine.
WARNING
DO NOT use flammable substances, any
type of spray, or an organic solvent/liquid
containing alcohol or ammonia to clean the
inside or outside of the machine. Doing so
could cause a fire. Instead, use only a dry,
lint-free cloth. (See Product Safety Guide:
To use the product safely.)
Be careful not to inhale toner.
Important
Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the surface of the machine.
Cleaning the outside of the
machine A
a Turn off the machine’s power switch.
Unplug the telephone line cord first,
disconnect all cables, and then unplug
the power cord from the AC power
outlet.
Note
(For FAX-2840 and MFC-7240)
To prevent you from losing any important
messages, see Basic User’s Guide:
Transferring your faxes or Fax Journal
report.
b Pull the paper tray completely out of the
machine.
Routine maintenance A

Brother IntelliFax-2840 Specifications

General

Print Technology	Laser
Fax Modem Speed	33.6 Kbps
Standard Memory	16 MB
Paper Capacity	250 sheets
Maximum Fax Resolution	203 x 392 dpi
Memory Transmission	Yes
Out-of-Paper Reception	Up to 400 pages
Print Resolution	2400 x 600 dpi
Copier Function	Yes
Copy Resolution	600 x 600 dpi
Telephone Handset	No
Caller ID	Yes
Fax Forwarding	Yes
Reduction/Enlargement	50% to 200%
Broadcasting	272 locations
Transmission Speed	Approximately 2.5 seconds per page
Copy Speed	21 cpm (copies per minute)
Print Speed	21 ppm (pages per minute)