General information
13
1
2.Fax 1
7.Replace
Toner
— Sets the machine to
continue or stop
printing after the LCD
shows Replace
Toner.
Continue The machine will
continue printing.
Replace the toner
cartridge with a new
one after the LCD
shows Toner
Ended.
29
Stop* The machine will stop
printing. Replace the
toner cartridge with a
new one.
2.Fax
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Setup
Receive
(In FAX mode
only)
1.Ring Delay The Ring Delay
setting sets the
number of times the
machine rings before
it answers in Fax
Only and Fax/Tel
modes.
(00 - 10)
02*
(Example for
Australia)
If you have external
or extension
telephones on the
same line as the
machine, choose the
maximum number of
rings.
38
2.F/T Ring
Time
Sets the length of the
fast double-ring time
in Fax/Tel mode.
20 Secs
30 Secs*
40 Secs
70 Secs
(For New Zealand)
20 Secs
30 Secs*
40 Secs
55 Secs
If the call is a fax,
then your machine
will receive it;
however, if it is a
voice call the
machine will sound
the F/T ring (a fast
double-ring) for the
time you have set in
the F/T Ring Time
setting. If you hear
the F/T ring it means
that you have a voice
caller on the line.
38
The factory settings are shown in Bold with an asterisk.
1.General Setup (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
