Brother MFC-1810 - Entering Text (MFC-1810, MFC-1811 and MFC-1815)

Chapter 1
28
Entering text (MFC-1810, MFC-1811 and
MFC-1815) 1
When setting certain menu selections, such as the Station ID and the name of a Speed Dial, you
will need to type text characters. The dial pad keys have letters printed on them. The keys: 0, #
and l do not have printed letters because they are used for special characters.
Press the appropriate dial pad key the number of times shown in this reference table to access
the character you want.
Inserting spaces
To enter a space in a fax number, press c once between numbers. To enter a space in a name,
press c twice between characters.
Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the
incorrect character, and then press Clear.
Inputting repeated letters
To enter a letter on the same key as the previous letter, press c to move the cursor right before
pressing the key again.
Inputting Special characters and symbols
Press l, # or 0, then press d or c to move the cursor to the symbol or character you want. Press
OK to choose it. The symbols and characters below will appear depending on your menu
selection.
Press number
Key on dial
pad
once twice three times four times five times
2 ABC2A
3 DEF3D
4 GH I 4G
5 JKL5J
6 MNO6M
7 PQRS7
8 TUV8T
9 WXYZ 9
Press l for (space) ! " # $ % & ’ ( ) l + , - . / m
Press # for : ; < = > ? @ [ ] ^ _
Press 0 for Ä Ë Ö Ü À Ç È É 0