Chapter 1
16
2.Setup Send
(Continued)
3.Overseas
Mode
If you are having
difficulty sending a
fax overseas due to a
bad connection, then
turning on Overseas
Mode may help.
On Turn this feature on if
you are having
difficulties sending
faxes overseas. This
feature will stay on for
the next fax only.
Off* Keep this setting Off
when the network
connection is good
and you can send an
overseas fax
sucessfully.
3.Anti-Junk
Fax (MFC-1810
and MFC-1815
only)
1.Register If you do not want to
receive a fax/call
from the specific
numbers, you can
register the numbers
up to 100 to the Anti-
Junk Fax list.
You need to apply for
the Caller ID service
at your local
telephone company.
You can not choose
the numbers that is
not stored in the
Caller ID memory.
— Choose the number
you want to register
to the Anti-Junk Fax
list by pressing
a and
b . Press OK and
then press 1.
2.Delete — Choose the number
you want to delete
from the Anti-Junk
Fax list by pressing
a
and
b . Press OK and
then press 1.
3.Print
Report
— You can print a list of
registered
fax/telephone
numbers in the Anti-
Junk Fax list.
3.Address
Book
(MFC-1811 only)
4.Address
Book
(MFC-1810 and
MFC-1815 only)
1.Speed Dial Stores up to 99
Speed Dial numbers.
Press (Address
Book) twice and
enter the two digit
Speed Dial number.
—
2.Fax (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
