Brother MFC-1810 - Page 27

General information
19
1
2.Brightness — Adjusts the copy
brightness for copies.
-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
Press c to increase
the brightness or
press d to decrease
the brightness.
3.Contrast — Adjust the contrast to
help an image look
sharper and more
vivid.
-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
Press c to increase
the contrast or press
d to decrease the
contrast.
4.ID Copy 1.Quality You can change the
default settings for ID
Copy.
Auto* Auto is the standard
mode for ordinary
printouts. If you want
to make it clearer,
choose Lighter.
Lighter
The factory setting
varies depending on
your country.
2.Brightness -nnnno+
-nnnon+*
-nnonn+
-nonnn+
-onnnn+
The factory setting
varies depending on
your country.
Press c to increase
the brightness or
press d to decrease
the brightness.
3.Contrast -
nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
Press c to increase
the contrast or press
d to decrease the
contrast.
4.2in1/1in1 2in1* Allows you to use the
2 in 1 (ID) Copy key
as a double- sided
copy.
50
1in1 Allows you to use the
2 in 1 (ID) Copy key
as a one-sided copy.
51
3.Copy (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.