Brother MFC-1911W - Page 20

General information
13
1
5.Dial Tone — You can shorten the
dial tone detect
pause.
Detection Your machine will
dial as soon as it
detects a dial tone.
No Detection* When you send a fax
automatically, by
default your machine
will wait for a fixed
amount of time
before it starts to dial
the number.
6.Phone Line
Set
— Chooses the phone
line type.
Normal*
PBX
ISDN
—68
7.Reset 1.Address &
Fax
Restores all stored
phone numbers and
fax settings.
1.Reset
2.Exit Cancel restore and
exit the menu.
2.All
Settings
Restores all the
machine settings to
factory default.
All Settings takes
less time than
Factory Reset.
1.Reset
2.Exit Cancel restore and
exit the menu.
0.Initial Setup (For MFC-1900, MFC-1901 and MFC-1905) (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.