Setting Up the Machine
8
STEP 1
6 Install each ink cartridge in the direction of the
arrow on the label.
Take care to match the color of the lock release
lever (1) with the cartridge color (2), as shown
in the diagram below.
7 Lift each lock release lever and gently push it
until it clicks, and then close the ink cartridge
cover.
Note
If the LCD shows Install Black,
Install Yellow, Install Cyan or
Install Magenta after you install the ink
cartridges, check that the ink cartridges are
installed properly.
The first time the ink cartridges are installed the
machine prepares and cleans the ink tube
system. This initial process will take more time
than a normal cleaning cycle but will happen
only once.
The LCD shows:
Preparing System
q
Approx 4 Minutes
Cleaning
q
Please Wait
1
2
M
brother
To Next Page
Loading...
Need help?
General
