Setting Up the Machine
10
STEP 1
4 The LCD shows:
Is Quality OK?
q
1.Yes 2.No
If all lines are clear and visible, press 1
(Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press 2
(No) on the dial pad and go to step 5.
5 The LCD asks you if the print quality is OK for
black and color. Press 1 (Yes) or 2 (No) on the
dial pad.
Black OK?
q
1.Yes 2.No
Color OK?
q
1.Yes 2.No
After pressing 1 (Yes) or 2 (No) for both black
and color, the LCD shows:
Start Cleaning?
q
1.Yes 2.No
6 Press 1 (Yes), the machine will then start
cleaning the colors.
7 After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
6 Choosing your language
(Canada only)
1 Press Menu.
2 Press 0.
3 Press 0.
4 Press a or b to choose your language
(English or French), and then press OK.
Language:English
5 Press Stop/Exit.
7 Setting the LCD contrast
You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty seeing
the LCD from your position, we recommend the
following contrast setting for improved viewing.
1 Press Menu.
2 Press 1.
3 Press 7.
4 Press a or b to choose Dark or Light.
5 Press OK.
6 Press Stop/Exit.
Contrast:Dark
Contrast:Light
OK Poor
To Next Page
Loading...
Need help?
General
