Brother MFC-230C User Manual (English)

Other manuals for Brother MFC-230C

Faqs3 pages

Quick Setup Guide28 pages

Questions and Answers:

T
tiffany99Aug 23, 2025
How to fix no printout on Brother All in One Printer?
- P
  phyllisvangAug 23, 2025
  If your Brother All in One Printer isn't printing, try these steps: * Check the interface cable connection on both the printer and your computer. * Ensure the printer is plugged in and turned on. * See if the LCD is showing an error message. * Verify the correct printer driver is installed and selected. * Make sure the printer is online by checking that ‘Use Printer Offline’ is unchecked in the printer settings. * Also, verify that none of the ink cartridges are empty, replacing them if needed.
E
Eric WilliamsAug 31, 2025
How to prevent paper jams from double feeding on Brother All in One Printer?
- A
  Ashley SimpsonSep 1, 2025
  To prevent paper jams caused by double feeding on your Brother All in One Printer, make sure you pull out the paper support until it clicks and unfold the paper support flap.
J
John PerryAug 31, 2025
How to fix wrinkled printouts from Brother All in One Printer?
- A
  Albert StewartAug 31, 2025
  To fix wrinkled printouts from your Brother All in One Printer, in the printer driver Basic tab, click Settings, and uncheck Bi-Directional Printing.
K
Kevin MclaughlinAug 30, 2025
Why does printing appear dirty from my Brother All in One Printer?
- C
  Cynthia PetersonAug 30, 2025
  If printing appears dirty or ink seems to run from your Brother All in One Printer, ensure you are using the proper types of paper. Avoid handling the paper until the ink is dry.
M
Monica ReedAug 29, 2025
How to prevent smudged stains on Brother All in One Printer output?
- I
  Ian WoodsAug 29, 2025
  To prevent smudged stains at the top center of printed pages from your Brother All in One Printer, ensure the paper is not too thick or curled.
A
adamburtonAug 28, 2025
Why are there stains on the reverse side of pages from my Brother All in One Printer?
- J
  Jesus RobinsonAug 28, 2025
  If stains appear on the reverse side or at the bottom of pages printed by your Brother All in One Printer, ensure the printer platen is not dirty with ink. Also, make sure you're using the paper support flap.
M
Maria SimpsonAug 27, 2025
Why is my Brother All in One Printer feeding multiple pages at once?
- C
  christina31Aug 27, 2025
  If your Brother All in One Printer is feeding multiple pages, make sure the paper is loaded properly in the paper tray. Also, ensure that you are not loading more than two types of paper in the tray simultaneously.
M
Michael TylerAug 26, 2025
Why is my Brother All in One Printer printing blank pages?
- K
  Kristin KiddAug 27, 2025
  If your Brother All in One Printer is printing blank pages, try cleaning the print head.
B
Brenda DunnAug 25, 2025
How to remove white horizontal lines in Brother All in One Printer output?
- L
  lhooperAug 26, 2025
  To address white horizontal lines appearing in text or graphics from your Brother All in One Printer, try cleaning the print head. Also, consider using the recommended types of paper.
K
Kenneth HunterAug 25, 2025
Why is the print quality poor on my Brother All in One Printer?
- W
  William MillerAug 25, 2025
  Poor print quality on your Brother All in One Printer can stem from several factors. Ensure the print quality setting is appropriate. Verify that the Printer Driver or Paper Type setting matches the paper you're using. Also, make sure your ink cartridges are fresh, as expired or improperly stored cartridges can cause clogging. Try using recommended paper types and ensure the printer's environment is between 68° F to 91° F (20° C to 33° C).