EasyManuals Logo

Brother MFC-295CN User Manual

Brother MFC-295CN
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
Troubleshooting and Routine Maintenance
107
B
Cannot Detect You installed a new ink too quickly
and the machine did not detect it.
Take out the new ink cartridge and
re-install it slowly until it clicks.
If you are not using genuine
Brother Innobella™ ink the
machine may not detect the ink
cartridge.
Use a new Genuine Brother Innobella™
Ink. If the error message is not cleared, call
Brother Customer Service.
An ink cartridge is not installed
properly.
Take out the new ink cartridge and re-
install it slowly until it clicks. (See
Replacing the ink cartridges on page 116.)
Cannot Print
Replace XX Ink
One or more of the ink cartridges
have reached the end of their life.
The machine will stop all print
operations. While memory is
available, black and white faxes
will be stored in the memory. If a
sending machine has a color fax,
the machine's ‘handshake’ will
ask that the fax be sent as black &
white. If the sending machine has
the ability to convert it, the color
fax will be stored in the memory
as a black & white fax.
Replace the ink cartridges. (See Replacing
the ink cartridges on page 116.)
Clean Unable XX
(Init Unable XX)
(Print Unable XX)
(Scan Unable XX)
(If the LCD shows
error number 46,
see the error message
Clean Unable 46
in this table.)
The machine has a mechanical
problem.
OR
A foreign object such as a
paperclip or ripped paper is in the
machine.
Open the scanner cover and remove any
foreign objects and paper scraps from
inside the machine. If the error message
continues, see Transferring your faxes or
Fax Journal report on page 112 before
disconnecting the machine so you will not
lose any important messages. Then,
disconnect the machine from the power for
several minutes and then reconnect it.
Error Message Cause Action

Table of Contents

Other manuals for Brother MFC-295CN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-295CN and is the answer not in the manual?

Brother MFC-295CN Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Digital senderNo
Maximum duty cycle2500 pages per month
Number of print cartridges4
Image formats supportedBMP, PCX, PNG
Maximum scan resolution19200 x 19200 DPI
Copy speed (black, normal quality, A4)22 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingMono faxing
Fax memory200 pages
Modem speed14.4 Kbit/s
Auto-redialingYes
Fax coding methodsJPEG, MH, MMR (Fax coding method), MR
Total input capacity100 sheets
Total output capacity50 sheets
Envelopes sizesC5, DL
Maximum print size216 x 356 mm
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4
Supported network protocols (IPv4)ARP, RARP, BOOTP, APIPA (Auto IP), NetBIOS/WINS, LPR/LPD, Custom Raw Port/Port9100, DNS Resolver, mDNS, FTP Server, TELNET, SNMPv1, TFTP, Scanner Port, LLTD responder, Web Services
Power requirementsAC 100-120V 50/60Hz
Networking features10/100 Base-TX
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, print, scan
Standard interfacesEthernet, USB 2.0
USB 2.0 ports quantity1
Sound pressure level (printing)50 dB
Power consumption (standby)6 W
Power consumption (average operating)26 W
Market positioningHome & office

Related product manuals