6
Setting Up the Machine
Warning
If ink gets in your eyes wash them with water
immediately, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
2
Open the top cover.
3
Remove the protective parts.
4
Take out the ink cartridge.
5
Carefully remove the bottom cap.
DO NOT touch the area shown in the
illustration below.
Keep the ink cartridge in an upright position
when you insert it into the slot.
4
Installing the Ink
Cartridges
No Cartridge
Do not throw away the protective parts.
You will need them when you transport the
machine.
Top Cover
If the cartridge cover comes off when you
open the bag the cartridge will not be
damaged.
Opening
OK
OK
Step 1
To Next Page
Loading...
Need help?
General
