To Next PageTo Next PageWhy can't I make copies on my Brother All in One Printer?
If you cannot make a copy with your Brother All in One Printer, make sure that the Copy key is illuminated. Also, make sure the panel cover is completely closed.
How to stop double-feeding and paper jams on Brother MFC-3360C?
If printed pages double-feed and cause a paper jam in your Brother All in One Printer, close the output paper tray cover and slide it forward, then push the paper tray firmly back into the machine. While holding the paper tray in place, pull out the paper support until it clicks and unfold the paper support flap.
Why is the print quality poor on my Brother All in One Printer?
If you're experiencing poor print quality with your Brother All in One Printer, start by checking the print quality settings. Ensure that the Printer Driver or Paper Type setting in the menu matches the paper you are using. Make sure your ink cartridges are fresh, as expired or improperly stored cartridges can cause clogs. Try using the recommended types of paper and ensure the printer's environment is between 20° C to 33° C (68° F to 91° F).
How to troubleshoot Brother MFC-3360C when it cannot send a fax?
If you cannot send a fax from your Brother All in One Printer, check all line cord connections. Make sure that the Fax key is illuminated. Ask the other party to check that the receiving machine has paper. Print the Transmission Verification Report and check for an error. Also, make sure the panel cover is completely closed.
What to do if Brother MFC-3360C does not print from Paint Brush?
To resolve printing issues from Paint Brush with your Brother All in One Printer, try setting the Display setting to ‘256 colours.’
How to resolve condensed print and white streaks on Brother All in One Printer?
If you experience condensed print and white streaks or cut-off sentences on your Brother All in One Printer, you probably had a bad connection, with static or interference on the telephone line. Ask the other party to send the fax again.
How to resolve dense lines on pages printed by Brother All in One Printer?
If your Brother All in One Printer prints dense lines on the page, check Reverse Order in the Basic tab of the printer driver.
How to fix wrinkled printouts from Brother All in One Printer?
If the printouts from your Brother All in One Printer are wrinkled, in the printer driver Basic tab, click the Settings, and uncheck the Bi-Directional Printing.
What to do if dialling doesn't work on Brother All in One Printer?
If dialling does not work on your Brother All in One Printer (no dial tone), check that the machine is plugged in and switched on. Check all line cord connections. Change Tone/Pulse setting. Lift the external phone’s handset, (or the machine’s handset if available), and then dial the number to send a manual fax. Wait to hear fax receiving tone before pressing Mono Start or Colour Start.
Why is my Brother All in One Printer printing blank pages?
If your Brother All in One Printer is printing blank pages, clean the print head.
General| Print Resolution | Up to 6000 x 1200 dpi |
|---|---|
| Copy Speed (Color) | 16 cpm |
| Display | LCD |
| Connectivity | USB 2.0 |
| Scanner Type | Flatbed |
| Functions | Print, Scan, Copy, Fax |
| Media Type | Plain paper, Transparencies |
| Ink Cartridges | Black, Cyan, Magenta, Yellow |
