To Next PageTo Next PageWhy does my Brother All in One Printer print color faxes in black and white?
If your Brother All in One Printer prints received color faxes only in black and white, replace the color ink cartridges that are empty or nearly empty, and then ask the other person to send the color fax again. Check that Fax Storage is set to OFF.
How to fix 'Check Cartridge' error on Brother MFC-3420C All in One Printer?
If your Brother All in One Printer displays 'Check Cartridge', it means an ink cartridge isn't properly installed. Remove the ink cartridge and re-install it, ensuring it is correctly seated.
What to do if Brother MFC-3420C says 'Ink Empty'?
If your Brother All in One Printer shows 'Ink Empty', this indicates that one or more ink cartridges are empty. Replace the empty ink cartridges.
How to fix 'Out of Memory' error on Brother MFC-3420C?
If your Brother All in One Printer shows the message 'Out of Memory', it means the device can’t store data in the memory. If you are faxing or copying, press Stop/Exit and wait until the other operations finish. Alternatively, clear the data in the memory. If you are printing, try reducing the print resolution.
What does 'Machine Error XX' mean on Brother MFC-3420C All in One Printer?
If your Brother All in One Printer shows a ‘Machine Error XX’ message, it means the machine has a mechanical problem.
Why are there vertical black lines when sending from my Brother MFC-3420C?
If your Brother All in One Printer produces vertical black lines when sending, and a copy shows the same problem, your scanner is dirty.
What does 'Not Registered' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Not Registered', it means you tried to access a Speed Dial number that is not programmed. Set up the Speed Dial number.
Why does my Brother MFC-3420C All in One Printer leave a smudged stain on the page?
If your Brother All in One Printer produces a smudged stain at the top center of the printed page, make sure the paper is not too thick or curled.
What does 'Media Error' mean on Brother All in One Printer (MFC-3820CN)?
If a media card error occurs on your Brother All in One Printer (MFC-3820CN), the media card is either bad or not formatted. Reinsert the correct media card.
How to fix 'Cover Open' error on Brother MFC-3420C All in One Printer?
If your Brother All in One Printer displays 'Cover Open', it means the scanner cover is not completely closed. Lift the scanner cover and close it again.
General| Brand | Brother |
|---|---|
| Model | MFC-3420C |
| Category | All in One Printer |
| Language | English |
