Brother MFC-3820CN - For Network Interface Cable Users (for Windows 98;98 Se;Me;2000 Professional;Xp); For Network Interface Cable Users; 98;98 Se;Me;2000 Professional;Xp)

24
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 13.
1
Connect the network cable to the MFC, and
then connect it to a free port on your hub.
Turn on the MFC by plugging in the power
cord.
2
Turn on your computer.
(For Windows
®
2000 Professional/XP, you
must be logged on as the administrator.)
3
Insert the supplied CD-ROM into your
CD-ROM drive. If the model name screen
appears, select your machine. If the
language screen appears, select your
language.
4
The CD-ROM main menu will appear.
Click Install Software.
5
Click MFL-Pro Suite in Main Application.
6
Click Install.
For Network Interface Cable Users
(For Windows
®
98/98SE/Me/2000 Professional/XP)
If this window does not appear, use
Windows
®
Explore to run the setup.exe
program from the root directory of the
Brother CD-ROM.
MFL-Pro Suite includes Network Printer
Driver, Network Scanner Driver, ScanSoft
®
PaperPort
®
, ScanSoft
®
TextBridge
®
,
Network PC-FAX Send software and True
Type fonts. PaperPort
®
is a document
management application for viewing
scanned originals. ScanSoft
®
TextBridge
®
,
which is integrated into PaperPort
®
, is an
OCR application that converts an image into
text and inserts it into your default word
processor.
If you see the following screen, click OK to
install the Windows
®
updates. After the
updates are installed your PC may restart.
Note: If it does the installation will
automatically continue.
If the installation does not continue
automatically, please open the installer
menu again by double-clicking the
setup.exe program from the root directory of
the Brother CD-ROM, and continue from
Step
4
.
Step 2