Brother MFC-3820CN - For Network Interface Cable Users; For Mac os 8.6 to 9.2 Users

32
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 13.
1
Turn off and unplug the MFC from the AC
outlet and disconnect it from your
Macintosh
®
if you already connected an
interface cable.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here icon to install
the printer, scanner and PC-FAX Send
drivers. If the language screen appears,
select your language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and
restart your Macintosh
®
.
7
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
8
Turn on the MFC by plugging in the power
cord.
For Network Interface Cable Users
For Mac OS
®
8.6 to 9.2 Users
Step 2