EasyManuals Logo
Home>Brother>All in One Printer>MFC-490CW

Brother MFC-490CW Quick Setup Guide

Brother MFC-490CW
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
36
Windows
®
Wireless Network
i The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
j When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
Note
If the machine is configured for your network,
choose the machine from the list, and then click
Next.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
If your machine shows APIPA in the IP
Address field, click Configure IP Address
and enter an IP address for your machine that
is suitable for your network.
If your wireless settings fail, an error message
will appear during the installation of MFL-Pro
Suite and the installation will be terminated. If
you encounter this failure, go to step 14 on
page 29 and setup the wireless connection
again.
If you are using WEP and the LCD displayed
'Connected' but your machine is not found,
make sure you entered the WEP key correctly.
The WEP key is case sensitive.
If the machine is not yet configured for use on
your network, the following screen appears.
Click OK.
The Configure IP Address window will
appear. Enter an IP address for your machine
that is suitable for your network by following the
on-screen instructions.
Important
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
For Windows Vista
®
, when this screen appears,
click the check box and click Install to complete
the installation correctly.

Other manuals for Brother MFC-490CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-490CW and is the answer not in the manual?

Brother MFC-490CW Specifications

General IconGeneral
Print technologyInkjet
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution1200 x 2400 DPI
Copier resize25 - 400 %
PC free copyingYes
Copy speed (black, normal quality, A4)22 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory480 pages
Modem speed33.6 Kbit/s
Dimensions (WxDxH)390 x 375 x 180 mm
Power requirementsAC 100-120V, 50/60Hz
Networking features10/100 Base-TX
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print, scan
Compatible operating systemsWindows Vista, Windows XP, Windows 2000, Mac, Linux
Total input capacity100 sheets
Total output capacity50 sheets
Auto document feeder (ADF) input capacity15 sheets
DisplayLCD
Display diagonal3.3 \
Market positioningHome & office
Compatible memory cardsCF, MS Pro, SD, SDHC, xD
Sound pressure level (printing)50 dB
Envelopes sizesC5, DL
Maximum print size216 x 356 mm
Paper tray media typesEnvelopes, Photo paper, Plain paper
Non-ISO print media sizesExecutive
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)ARP, RARP, BOOTP, APIPA (Auto IP), NetBIOS/WINS, LPR/LPD, Custom Raw Port/Port9100, DNS, mDNS, FTP, TELNET, SNMPv1, TFTP, LLTD, Web
Standard interfacesUSB 2.0
USB 2.0 ports quantity1
Sustainability certificatesENERGY STAR
Power consumption (standby)6 W
Power consumption (average operating)29 W
Operating relative humidity (H-H)20 - 80 %
Digital senderNo
Maximum duty cycle2500 pages per month

Related product manuals