Brother MFC-5460CN

Menu and Features
137
5.LAN 1.Setup TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
You can choose the BOOT
method that best suits you
needs.
See
Network
User’s
Guide
2.IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3.Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the subnet mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5.Node Name BRN_XXXXXX Enter the Node name.
6.WINS Config Auto*
Static.
You can choose the WINS
configuration mode.
7.WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
server.
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
server.
9.APIPA On*
Off
Automatically allocates the
IP address from the
link-local address range.
2.Setup Misc. 1.Ethernet Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses Ethernet link
mode.
See
Network
User’s
Guide
0.Factory Reset — — Restore all network
settings to factory default.
Main Menu Submenu Menu Selections Options Descriptions Page