Brother MFC-7365DN Advanced User's Guide

Dialing and storing numbers
39
5
f (For MFC-7365DN/7460DN/7860DW)
If you want to change the fax resolution
for the Group, press a or b to choose the
resolution you want.
Press OK.
g Press Stop/Exit.
If you downloaded IFAX and E-mail
options
(MFC-7365DN, MFC-7460DN and
MFC-7860DW)
5
If you try to change a Group number, the LCD
will show the name or number already stored
there.
a Press Menu, 2, 3, 3.
Address Book
3.Setup Groups
b Choose the One Touch key or Speed
Dial number where the Group number is
stored.
Do one of the following:
 Press the One Touch key.
 Press (Address Book) and then
enter the three-digit Speed Dial
number.
Press OK.
Note
If the Group number you are trying to
change has been set to a fax forwarding
number, the LCD will ask you if you want
to change the name or number.
c Do one of the following:
 To change the stored Group
information, press 1. Go to step d.
 To exit without making a change,
press Stop/Exit.
G01:*001*002#001
1.Change 2.Clear
d Press a or b to select one of the
following:
Fax/IFAX
Email Color PDF
Email Color JPG
Email Color XPS
Email Gray PDF
Email Gray JPG
Email Gray XPS
Email B&W PDF
Email B&W TIFF
Press OK.
e Add or delete One Touch or Speed Dial
numbers by following the instructions below:
 To add One Touch numbers,
press d or c to position the cursor
just after the last number. Then press
the One Touch key of the number
you want to add.
 To add Speed Dial numbers,
press d or c to position the cursor
just after the last number. Then press
(Address Book) and enter the
three-digit Speed Dial location of the
number you want to add.
 To delete One Touch or Speed Dial
numbers, press d or c to position the
cursor under the number you want to
delete, and then press Clear.
Press OK.
f Edit the name as follows:
 To edit the name, press d or c to
position the cursor under the
character you want to change. Then
press Clear to delete it, and enter the
correct character using the dial pad.
When you have finished editing,
press OK.

Brother MFC-7365DN Specifications

Printing Specifications

print technology	Electrophotographic Laser
print speed	Up to 24ppm
print resolution	Up to 1200 x 600 dpi

Copying Specifications

copy speed	Up to 24cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning Specifications

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11” (letter)
scan resolution	Optical: Up to 600 x 2400 dpi

Paper Handling

paper size maximum	Up to 8.5” x 14” (legal size)
paper input capacity maximum	250-sheet capacity paper tray, single-sheet manual feed slot
output capacity maximum	100 sheets (face down), 1 sheet (face up)

Weight and Dimensions

unit dimensions	15.9” W x 15.7” D x 12.4” H
unit weight	25.6 lbs.
carton weight	32.6 lbs.
carton dimensions	20.7” W x 20.1” D x 19.4” H