What does 'Comm.Error' mean on my Brother All in One Printer?
A 'Comm.Error' on your Brother All in One Printer indicates a communication error due to poor telephone line quality. Try sending the fax again or connect the machine to another telephone line. If the problem persists, contact your telephone company to check your line.
Why does my Brother MFC-7365DN say 'No Paper'?
If your Brother All in One Printer displays 'No Paper', it means the printer is out of paper or the paper isn't loaded correctly. You can either refill the paper tray and press Start, or remove the paper and reload it before pressing Start again. If the problem continues, the paper pick-up roller may need cleaning.
How to fix 'Size mismatch' error on Brother MFC-7365DN All in One Printer?
A 'Size mismatch' error on your Brother All in One Printer means the paper in the tray is not the correct size. Load an appropriate size of paper in the tray, and reset the “Paper Size”.
What to do if my Brother All in One Printer says 'Cooling Down Wait for a while'?
If your Brother All in One Printer displays 'Cooling Down Wait for a while', it means the drum unit or toner cartridge is too hot. Ensure the fan is spinning and the exhaust outlet isn't blocked. If the fan works, remove any obstructions around the exhaust outlet and let the machine sit idle for several minutes. If the fan isn't spinning, disconnect and reconnect the machine from the power source after a few minutes.
Why does my Brother All in One Printer say 'No Toner'?
If your Brother All in One Printer displays 'No Toner', the toner cartridge might not be installed correctly. Pull out the drum unit, remove the toner cartridge, and then reinsert it back into the drum unit.
What to do if my Brother MFC-7365DN says 'Cover is Open'?
The 'Cover is Open' error on your Brother All in One Printer indicates that a cover is not completely closed. Here's what to check: - Ensure the front cover is fully closed. - Ensure the ADF cover is fully closed. - If loading a document, close the ADF cover and press Stop/Exit. - Ensure the fuser cover is closed, especially after a paper jam.
How to fix 'Cartridge Error' on a Brother MFC-7365DN?
If you're seeing a 'Cartridge Error' on your Brother All in One Printer, the toner cartridge might not be installed correctly. Pull out the drum unit, remove the toner cartridge, and then reinstall it into the drum unit.
What to do if my Brother All in One Printer says 'Out of Memory'?
The Brother All in One Printer's memory is full. If you're faxing or copying, you can press Start to continue with the scanned pages or press Stop/Exit and wait for other operations to finish before trying again. Alternatively, clear faxes from the memory by printing them to free up space, then turn off Fax Storage to prevent future memory issues. If you're printing, try reducing the print resolution or clearing faxes from the memory.
Why is duplex printing disabled on my Brother MFC-7365DN?
If your Brother All in One Printer shows 'Duplex Disabled', it means either the duplex tray is removed or not properly installed, or the back of the machine isn't completely closed. Make sure the duplex tray is correctly inserted until it clicks into place, and ensure the back cover of the machine is closed.
What causes 'Document Jam' on Brother All in One Printer?
A 'Document Jam' error on your Brother All in One Printer means the document wasn't inserted or fed correctly, or the document scanned from the ADF was too long.
Printing Specifications| print technology | Electrophotographic Laser |
|---|---|
| print speed | Up to 24ppm |
| print resolution | Up to 1200 x 600 dpi |
Copying Specifications| copy speed | Up to 24cpm |
|---|---|
| copy resolution | 600 x 600 dpi |
| copy reduction/enlargement | 25% - 400% in 1% increments |
Scanning Specifications| scanner type | Color Flatbed with ADF |
|---|---|
| document glass size | 8.5” x 11” (letter) |
| scan resolution | Optical: Up to 600 x 2400 dpi |
Paper Handling| paper size maximum | Up to 8.5” x 14” (legal size) |
|---|---|
| paper input capacity maximum | 250-sheet capacity paper tray, single-sheet manual feed slot |
| output capacity maximum | 100 sheets (face down), 1 sheet (face up) |
Weight and Dimensions| unit dimensions | 15.9” W x 15.7” D x 12.4” H |
|---|---|
| unit weight | 25.6 lbs. |
| carton weight | 32.6 lbs. |
| carton dimensions | 20.7” W x 20.1” D x 19.4” H |
To Next Page
