Brother MFC-8460N - Storing Speed-Dial Numbers

Chapter 8
62
Storing Speed-Dial numbers 8
You can store your frequently used numbers
as Speed-Dial numbers. The machine can
store 300 Speed-Dial numbers.
MFC-8460N: 8
a Press Menu, 2, 3, 2.
23.Set Quick-Dial
2.Speed-Dial
Speed-Dial? #
Enter & OK Key
b Use the dial pad to enter a three digit
Speed-Dial location number (001–300).
Press OK.
c Enter the phone or fax number (up to 20
characters). Press OK.
d Choose one of the options below:
 Enter the name using the dial pad
(up to 15 characters). Use the chart
Entering Text on page 153 to help
you enter letters. Press OK.
 Press OK to store the number
without a name.
e Choose one of the options below:
 To store the fax resolution, press a
or b to select Std, Fine, S.Fine or
Photo. Press OK.
 Press OK if you don’t want to change
the default resolution.
f Choose one of the options below:
 To store another Speed-Dial number
go to b.
 To finish storing Speed-Dial
numbers press Stop/Exit.
MFC-8860DN: 8
a Press Menu, 2, 3, 2.
23.Set Quick-Dial
2.Speed-Dial
Speed-Dial? #
Enter & OK Key
b Use the dial pad to enter a three digit
Speed-Dial location number (001–300).
Press OK.
c Press a or b to select Fax/Tel,
E-Mail or IFAX. Press OK.
d Choose one of the options below:
 Enter the number (up to 20
characters) when you select
Fax/Tel.
 Enter the E-mail address (up to 60
characters) when you select E-Mail
or IFAX. Use the chart Entering Text
on page 153 to help you enter letters.
Press OK.
Note
If you selected E-Mail and save the
E-mail address, you can only use the
E-mail address when you are in Scan
mode. If you selected IFAX and save the
E-mail address, you can only use E-mail
address when you are in Fax mode.
e Choose one of the options below:
 Enter the name using the dial pad
(up to 15 characters). Press OK.
 Press OK to store the number or E-
mail address without a name.