Brother MFC-8460N - Adjusting Contrast; Sorting Copies Using the ADF

Making copies
85
12
Sorting copies using the ADF12
You can sort multiple copies. Pages will be
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a Make sure you are in Copy mode
.
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Sort.
e Press Start.
Adjusting contrast 12
Contrast 12
Adjust the contrast to help an image look
sharper and more vivid.
To temporarily change the contrast setting,
follow the instruction below:
a Make sure you are in Copy mode
.
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d (MFC-8460N)
Press Contrast.
(MFC-8860DN)
Press Contrast/Quality.
Press a or b to choose Contrast.
Press OK.
Contrast:-nnonn+c
Quality :Auto
Enlg/Red:100%
Tray :MP>T1
Select d c & OK
e Press d or c to increase or decrease
the contrast.
f Press Start.
To change the default setting follow the
instructions below:
a Press Menu, 3, 3.
33.Contrast
-
nnonn+
Select d c & OK
b Press d or c to change the contrast.
Press OK.
c Press Stop/Exit.