82
Packing and shipping
the machine A
This machine is heavy and weighs more
than 44.1 lb (20.0 kg). To prevent possible
injuries, at least two people should lift the
machine. One person should hold the front
of the machine, and one person should hold
the back, as shown in the illustration. Be
careful not to trap your fingers when you put
the machine down.
• If for any reason you must ship your
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
• Unless you are returning the machine as
part of the Brother Exchange Service,
leave the toner cartridges and drum units
inside the machine when you pack and
ship it.
a Press and hold down to turn off the
machine. Leave the machine turned off
for at least 10 minutes to cool down.
b Disconnect all the cables, and then
unplug the power cord from the AC
power outlet.
c Place the packing material (1) into the
carton.
To Next Page
Loading...
