How to check wireless connection status on Brother MFC-9130CW All in One Printer?
To check the wireless connection status of your Brother All in One Printer, print the WLAN report. If there is an error code on the printed WLAN report: see Quick Setup Guide: Troubleshooting.
What to do if Brother All in One Printer still won't print/scan?
If your Brother All in One Printer still won't print or scan after trying the above steps, uninstall and then reinstall the MFL-Pro Suite.
What happens if I didn't accept security alert during MFL-Pro Suite installation for Brother MFC-9130CW All in One Printer?
If you did not accept the security alert dialog box during the MFL-Pro Suite installation, application start-up process, or when using the printing/scanning features, the firewall function of your security software may be rejecting access. Some security software might block access without showing a security alert dialog box. To allow access, see the instructions of your security software or ask the manufacturer.
What to do if Brother MFC-9130CW All in One Printer is not found on network during MFL-Pro Suite installation?
If the Brother All in One Printer is not found on the network during MFL-Pro Suite installation, consider the following: * Print the Network Configuration Report and verify that the Ethernet Link Status or Wireless Link Status shows 'Link OK'. If it displays 'Failed To Associate' or 'Link DOWN', consult your network administrator to validate your IP address. * Retry searching for the Brother machine in the installer dialog box. * Allow access if a security software alert appears during the MFL-Pro Suite installation. * Position the Brother machine within approximately 3.3 feet (1 meter) of the WLAN access point/router during wireless network settings configuration. * Relocate the Brother machine to an area free of obstructions or closer to the WLAN access point/router. * Remov...
How to handle a failed printing job on Brother All in One Printer?
If a previous printing job failed on your Brother All in One Printer, remove it from the computer's print queue. To do this: * (Windows® XP/Windows Vista®/ Windows® 7/Windows Server® 2003) Double-click the printer icon in the following folder and then choose Cancel All Documents in the Printer menu: (Windows® XP/Windows Server® 2003) Start and Printers and Faxes. (Windows Vista®), Control Panel, Hardware and Sound, and then Printers. (Windows® 7), Devices and Printers, and then Printers and Faxes. * (Windows® 8) Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings, and then click Control Panel. In the Hardware and Sound group, click View devices and printers. Right-click your Brother machine, select See what’s printing, and then select y...
Printing| print speed black | up to 19 ppm |
|---|---|
| print speed color | up to 19 ppm |
| print resolution | up to 600 x 2400 dpi |
| print technology | Digital Color LED |
Copying| copy speed black | up to 19 cpm |
|---|---|
| copy speed color | up to 19 cpm |
| copy resolution | 600 x 600 dpi |
| copy reduction/enlargement | 25% - 400% in 1% increments |
Scanning| scanner type | Color Flatbed with ADF |
|---|---|
| document glass size | 8.5” x 11.7” |
| scan resolution optical | 1200 x 2400 dpi |
| scan resolution interpolated | 19200 x 19200 dpi |
Faxing| fax modem | 33.6 kbps |
|---|---|
| fax page memory | up to 500 pages |
| speed dial locations | 200 |
Paper Handling| auto document feeder capacity | up to 35 pages |
|---|---|
| paper size maximum | up to 8.5” x 14” (legal) |
| large paper capacity | 250-sheet capacity paper tray |
Display| lcd display type/size | 3.7” Color TouchScreen |
|---|---|
| touchscreen display size | 3.7 inches |
Memory| standard memory | 192MB |
|---|---|
| maximum memory | 192MB |
To Next Page