When to change toner Brother MFC-9160?
The Brother All in One Printer indicates it's time to change the toner when the toner is depleted. The machine is designed to alert you when the toner is about to run out, so it's a good idea to order a new toner cartridge at that time.
What to do if Brother MFC-9160 All in One Printer says check paper?
If your Brother All in One Printer displays a 'CHECK PAPER' message, it means the machine is either out of paper or the paper isn't loaded correctly in the Multi-purpose Sheet Feeder. Refill the paper, or remove the paper, reload it properly, and then press the Copy button.
What to do if my Brother MFC-9160 shows machine error XX?
If your Brother All in One Printer displays 'MACHINE ERROR XX', it indicates a mechanical problem with the machine. Turn off the power and contact your Brother dealer for service.
Why Brother MFC-9160 says pls open cover?
If your Brother All in One Printer shows 'PLS OPEN COVER', it means that a page, a piece of paper, or a paper clip may be jammed inside the machine. Open the top cover and remove the drum unit. If you see any jammed paper or another item, gently pull it out. Reinstall the drum unit, then close the top cover.
How to know when to change drum soon in Brother MFC-9160 All in One Printer?
The Brother All in One Printer displays 'CHANGE DRUM SOON' when the drum unit is near the end of its life. If you are experiencing print quality issues, replace the drum unit with a new one.
How to fix out of memory error on Brother MFC-9160 All in One Printer?
If your Brother All in One Printer displays an 'OUT OF MEMORY' error when used as a printer, it means the machine's memory capacity has been exceeded. If you have installed the Windows® driver, try again after setting the True Type mode to 'Print as Graphics' in the PRINT menu of your application software. Alternatively, reduce the print resolution or reduce the complexity of your document.
How to resolve cover open error on Brother MFC-9160 All in One Printer?
If your Brother All in One Printer displays 'COVER OPEN', it means the top cover was not completely closed. Open and then close the cover to resolve this issue.
What to do if Brother MFC-9160 says pls close cover?
If your Brother All in One Printer displays 'PLS CLOSE COVER', it indicates that the top cover is not closed completely. Open the top cover, then close it properly.
What to do if Brother MFC-9160 All in One Printer says doc. cover open?
If your Brother All in One Printer displays 'DOC. COVER OPEN', it means the document cover is open. Remove any paper from the ADF and close the document cover.
Why does my Brother MFC-9160 All in One Printer say check paper size?
The 'CHECK PAPER SIZE' message on your Brother All in One Printer indicates that the paper size is improper for printing HELP or SYSTEM SETUP. Load A4 paper in the multi-purpose sheet feeder, and then press the Copy button.
General| Brand | Brother |
|---|---|
| Model | MFC-9160 |
| Category | All in One Printer |
| Language | English |
To Next Page
