Custom Settings 11
CUSTOM SETUP
Setting the Print Density
If the machine is printing too light or too dark, you can adjust the print density level. The new setting
will remain until you change it again. This setting also adjusts that of copy function.
1
Press Menu/Set, 1, 4.
2
Press or to select your setting. Each key press changes the print density to the next
setting.
3
When the screen shows the setting you want, press Menu/Set.
4
Press Stop/Exit.
Toner Save
You can conserve toner using this feature. When you set Toner Save to ON, print appears somewhat
lighter. The default setting is OFF.
1
Press Toner Save.
2
Press or to select ON (or OFF).
3
Press Menu/Set.
Using the Reports Key
Two lists are available.
To Print a Report
1
Press Reports.
2
Press or to select the report you want, and then press Menu/Set.
—OR—
Enter the number of the report you want to print. For example, press 1 to print the Help List.
Lists basic operational steps and functions.
Lists your latest default settings for GENERAL SETUP.
1.HELP
2.SYSTEM SETUP
To Next Page
Loading...
