Brother MFC-9160 - Chapter 7 Using the Brother MFC with a New Power; Set up Your USB Equipped Apple Macintosh G3,G4 or Imac with Mac os 8.5;8.5.1;8.6;9.0;9.0.4;9.1; Using Brother Printer Driver with Your Apple Macintosh

Using the Brother MFC with a New Power Macintosh
®
G3, G4 or iMac
™
/ iBook
™
53
PRINTER/SCANNER
7 Using the Brother MFC with a New Power Macintosh
®
G3, G4 or iMac
™
/ iBook
™
Set up Your USB Equipped Apple
®
Macintosh
®
G3,G4 or iMac
™
with
Mac OS 8.5/8.5.1/8.6/9.0/9.0.4/9.1
To work with the machine, your USB-Equipped Apple
®
Macintosh
®
must be set up with Mac OS
8.5/8.5.1/8.6/9.0/9.0.4/9.1. (The Brother Scanner Driver works only with Mac OS 8.6/9.0/9.0.4/9.1.)
Using Brother Printer Driver with your
Apple
®
Macintosh
®
To select the Printer:
1 From the Apple menu, open the Chooser.
2 Click the HL-1200/MFL Pro icon. On the right side of the Chooser, click the printer to which
you want to print. Close the Chooser.
Before you can connect the machine to your Macintosh
®
, you must purchase a
USB cable that is no longer than 6 feet (1.8 meters).