Brother MFC-9130CW User Manual

20
2
Loading paper and
print media
2
The machine can feed paper from the paper
tray or manual feed slot.
When you load paper in the paper tray, note
the following:
 If your application software supports
paper size selection on the print menu,
you can select it through the software. If
your application software does not
support it, you can set the paper size in
the printer driver or by pressing the
buttons on the Touchscreen.
Loading paper in the paper
tray 2
You can load up to 250 sheets in the paper
tray. Paper can be loaded up to the maximum
paper mark ( ) on the right side of the
paper tray (for the recommended paper to
use, see Acceptable paper and other print
media on page 28).
Printing on plain paper, thin paper or
recycled paper from the paper tray 2
a Pull the paper tray completely out of the
machine.
b While pressing the green paper-guide
release levers (1), slide the paper
guides to fit the paper you are loading in
the tray. Make sure the guides are firmly
in the slots.
c Fan the stack of paper well to avoid
paper jams and misfeeds.
Loading paper 2


Brother MFC-9130CW Specifications

Printing

print speed black	up to 19 ppm
print speed color	up to 19 ppm
print resolution	up to 600 x 2400 dpi
print technology	Digital Color LED

Copying

copy speed black	up to 19 cpm
copy speed color	up to 19 cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11.7”
scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi

Faxing

fax modem	33.6 kbps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
large paper capacity	250-sheet capacity paper tray

Display

lcd display type/size	3.7” Color TouchScreen
touchscreen display size	3.7 inches

Memory

standard memory	192MB
maximum memory	192MB