Why does my Brother All in One Printer not answer when called?
Make sure the Brother All in One Printer is in the correct receiving mode for your setup (either Fax, Fax/Tel (F/T) or TAD). Check for dial tone. If possible, call the machine to hear it answer. If there is still no answer, check the telephone line cord connection. If there is no ringing when you call the machine, call your Telephone Company to check the line.
How to fix 'CHANGE DRUM SOON' on Brother MFC-9180?
The 'CHANGE DRUM SOON' message on your Brother All in One Printer means the drum unit is near the end of its life. If you are experiencing print quality issues, replace the drum unit with a new one.
What to do if my Brother MFC-9180 All in One Printer says 'TONER EMPTY'?
If your Brother All in One Printer displays 'TONER EMPTY', it means that the toner is used up and printing is no longer possible, or the toner cartridge is not installed into the drum unit. Replace the toner cartridge with a new one, or install the toner cartridge into the drum unit. (See Replacing the Toner Cartridge, page 131.)
How to resolve 'OUT OF MEMORY' error on Brother All in One Printer when printing?
If your Brother All in One Printer displays an 'OUT OF MEMORY' error when used as a printer, the machine memory capacity has been exceeded. If you have installed the Windows® driver, try again after setting the True Type mode to 'Print as Graphics' in the PRINT menu of your application software. Reduce the print resolution or reduce the complexity of your document.
Why is my Brother MFC-9180 All in One Printer not printing?
Make sure the Brother All in One Printer is plugged in, the toner cartridge and drum unit are installed properly, and the interface cable is securely connected between the machine and computer. Check to see if LCD is showing an error message.
Why is dialling not working on my Brother MFC-9180?
Check for a dial tone. Change TONE/PULSE setting. (See Setting the Dialling Mode (Tone/Pulse), page 21.) Check all line cord connections. Check power cord connection. Send a manual fax by lifting the external telephone’s handset, and dialling the number. Wait to hear fax receiving tones before pressing Fax Start.
What does 'CONNECTION FAIL' mean on my Brother MFC-9180?
The 'CONNECTION FAIL' message on your Brother All in One Printer means that you tried to poll a fax machine that is not in Polled Waiting mode. Verify the other party’s polling setup.
What does 'NOT ASSIGNED' mean on my Brother All in One Printer?
The 'NOT ASSIGNED' message on your Brother All in One Printer means that you tried to access a Speed Dial number that is not programmed. Set up the Speed Dial number. (See Storing Speed Dial Numbers, page 21.)
Why does my Brother MFC-9180 All in One Printer say 'COOLING DOWN WAIT FOR A WHILE'?
The message 'COOLING DOWN WAIT FOR A WHILE' on your Brother All in One Printer indicates that the temperature of the drum unit or toner cartridge is too high. You must wait and allow the machine to resume printing when it is ready.
What does 'CHECK DRUM UNIT' mean on my Brother MFC-9180 All in One Printer and how to fix it?
The 'CHECK DRUM UNIT' message on your Brother All in One Printer indicates that the drum unit is not installed. Reinstall the drum unit to resolve this issue.
General Copier Specifications| engine laser speed | 10 copies per minute |
|---|---|
| modem speed | 14, 400 bps |
| resolution | 600 x 300 dpi |
Scanner Specifications| optical resolution | 600 x 2, 400 dpi |
|---|---|
| interpolated resolution | 9, 600 x 9, 600 dpi |
| CPU speed | 100MHz |
Memory and Capacity| total memory capacity | 8 MB |
|---|---|
| memory back-up | 4 days |
| ADF capacity | 30 sheets |
Printer Specifications| print speed | 10 pages per minute |
|---|---|
| resolution | 600 x 600 dpi |
| paper capacity | 200 sheets |
Fax Weights and Measures| dimensions | 459mm width x 458mm depth x 354mm height |
|---|---|
| weight | 11 Kg |
| power consumption (sleep) | 15 w or less |
To Next Page
