Why are there one color spots or dirt on prints from my Brother All in One Printer?
If you notice one color spots or dirt appearing on prints from your Brother All in One Printer, it could be due to fuser unit failure or toner/new sensor PCB failure. Consider replacing the fuser unit or the toner/new sensor PCB ASSY.
What to do if network scanning feature does not work in Windows for Brother Print Server?
If the network scanning or PC Fax feature isn't working in Windows with your Brother print server, it's possible that your PC's firewall settings are blocking the necessary network connection. Try disabling the firewall to resolve this issue.
What to do if there is an error during printing with Brother Print Server?
If you are experiencing errors during printing with your Brother print server, it could be because the printer is busy processing large print jobs from other users. Please try to execute your print job again after the other jobs are completed.
How to solve Brother Print Server not found during network print software setup?
If the Brother print server is not found during the network print software setup or printer driver installation in Windows, ensure that you have configured the IP address settings of the Brother print server. Refer to Chapter 2 of the User's Guide for instructions before proceeding with the installation.
What causes color misregistration on my Brother All in One Printer?
If you're experiencing color misregistration issues with your Brother All in One Printer, it could be due to an engine PCB failure or a Registration mark L PCB ASSY failure. You may need to replace the engine PCB ASSY or the registration sensor holder ASSY to correct this.
What to do if CD-ROM does not start automatically for Brother Print Server?
If the CD-ROM with the Brother print server software doesn't start automatically, execute Start.exe in the root directory of the CD-ROM or reset the print server back to its factory default settings.
Why are there vertical streaks in a light background on prints from my Brother All in One Printer?
If you're seeing vertical streaks in a light background on your Brother All in One Printer prints, it is likely due to a LED ASSY failure. The suggested solution is to replace the LED ASSY.
What causes downward fogging of solid colors on my Brother MFC-9320CW?
If the solid colors on your Brother All in One Printer prints are fogging downward, it could be due to HVPS control PCB failure, high-voltage power supply PCB failure, engine PCB failure, or main PCB failure. To resolve this, replace the HVPS control PCB ASSY, the high-voltage power supply PCB ASSY, the engine PCB ASSY, or the main PCB ASSY.
What causes horizontal stripes on Brother MFC-9320CW All in One Printer output?
If you're seeing horizontal stripes on your Brother All in One Printer prints, it could be caused by dirt on the charged electrode, a bend of the tray ground spring, toner attached on the develop roller, a scratch on the heat roller, or HVPS control PCB failure. You can try cleaning both electrodes. If the issue continues, replace the paper tray or the fuser unit. This problem might disappear by printing approximately 10 pages; if it does not, replace the toner cartridge. If the problem still occurs, replace the HVPS control PCB ASSY.
Why does my Brother MFC-9320CW All in One Printer have vertical streaks on printouts?
If you're experiencing vertical streaks on your printouts from your Brother All in One Printer, it could be due to dirt in the paper feed system, a dirty exposure drum, a bend in the tray ground spring, a scratch on the heat roller, or a LED ASSY failure. Try wiping off any dirt from the paper feed system and cleaning the drum unit. If the issue continues, you may need to replace the paper tray, the fuser unit, or the LED ASSY.
General| Duplex printing | Yes |
|---|---|
| Print technology | LED |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 15 s |
| Time to first page (color, normal) | 16 s |
| Print speed (black, normal quality, A4/US Letter) | 16 ppm |
| Scan to | e-mail, FTP, OCR |
| Scanner type | Flatbed scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Optical scanning resolution | 1200 x 2400 DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| Time to first copy (black, normal) | 19 s |
| Time to first copy (color, normal) | 24 s |
| Copy speed (black, normal quality, A4) | 16 cpm |
| Faxing | Color faxing |
| Fax memory | 500 pages |
| Modem speed | 33.6 Kbit/s |
| Fax speed dialing (max numbers) | 200 |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Internal memory | 64 MB |
| Card reader integrated | No |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Display | LCD |
| Market positioning | Business |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Dimensions (WxDxH) | 491 x 428 x 401 mm |
| All-in-one functions | Copy, Fax, Scan |
| Maximum internal memory | 0.576 GB |
| Color all-in-one functions | copy, fax, print, scan |
| Security algorithms | 128-bit WEP, 64-bit WEP, EAP, WPA-AES, WPA-PSK, WPA-TKIP |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Power consumption (off) | 12 W |
| Power consumption (standby) | 72 W |
| Power consumption (average operating) | 480 W |
| Maximum print size | 216 x 356 mm |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Package weight | 29000 g |
| Maximum duty cycle | 1500 pages per month |
| Sustainability certificates | ENERGY STAR |
To Next Page
