Brother MFC-9320CW - Making N in 1 Copies

Making copies
85
12
To change the default setting follow the steps
below:
a Press Menu, 3, 3.
b Press a or b to increase or decrease the
contrast.
Press OK.
c Press Stop/Exit.
Brightness 12
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Options.
Press a or b to choose Brightness.
Press OK.
e Press a to make a lighter copy or press
b to make a darker copy.
Press OK.
f Press Mono Start or Color Start.
To change the default setting follow the steps
below:
a Press Menu, 3, 2.
b Press a to make a lighter copy or press
b to make a darker copy.
Press OK.
c Press Stop/Exit.
Color saturation 12
You can change the default setting for color
saturation.
To change the default setting follow the steps
below:
a Press Menu, 3, 4.
b Press a or b to choose 1.Red,
2.Green, or 3.Blue.
Press OK.
c Press a or b to increase or decrease the
color saturation.
Press OK.
d Return to step b to choose the next
color. Or press Stop/Exit.
Making N in 1 copies
(page layout) 12
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page, which lets you save
paper.
IMPORTANT
• Please make sure the paper size is set to
Letter, A4, Legal or Folio.
•(P) means Portrait and (L) means
Landscape.
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Options. Press a or b to choose
Page Layout. Press OK.