Brother MFC-9320CW - Improving Copy Quality

Chapter 12
82
Improving copy quality 12
You can choose from a range of quality
settings. The default setting is Auto.
 Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.
 Photo
Suitable for copying photographs.
 Text
Suitable for documents containing only
text.
To temporarily change the quality setting,
follow the steps below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Quality.
e Press a or b to choose Auto, Photo or
Text.
Press OK.
f Press Mono Start or Color Start.
To change the default setting, follow the
steps below:
a Press Menu, 3, 1.
b Press a or b to choose the copy quality.
Press OK.
c Press Stop/Exit.