• Press simultaneously with COLOR COPY to start scanning documents (in color or black and white,
depending on the scan setting).
• Press simultaneously with (STOP) to access the Reset Mode.
6. COLOR COPY
• Press to start making copies in full color.
7. Ink LED
Indicates when the machine detects an ink error or is in Maintenance Mode.
8. Warning LED
Indicates when the machine detects an error or is in Reset Mode.
9.
(STOP) Power On/Off
• Press to stop an operation.
• Press to exit from a selected mode.
• Press
(STOP) to turn on the machine.
Press and hold down (STOP) to turn off the machine and cancel all of the remaining operations. The
Power LED blinks and stays on for a few seconds before turning itself off.
If you turn off the machine using
(STOP), it will still clean the print head periodically to maintain print
quality. To prolong print head life, provide better ink efficiency, and maintain print quality, keep your
machine connected to a power source at all times.
10. (Wi-Fi)
• Press the button by itself or simultaneously with another button to configure the wireless settings or print
network reports. Use only when the machine is idle.
• Press this button and COLOR COPY simultaneously to restart the Wi-Fi if you cannot connect to your
wireless network.
• Press simultaneously with
(STOP) to access the Wi-Fi Mode.
Related Information
• Introduction to Your Machine
11
To Next Page
Loading...
Need help?
General
