Brother MFC-J270w Advance User Guide

PhotoCapture Center
®
: Printing photos from a memory card
37
8
Scan to a memory card8
How to set a new default 8
You can save the Scan to Media settings
(Quality and File Type) you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a Press (SCAN).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Set New Default. Press OK and 1 to
choose Yes.
d Press Stop/Exit.
How to reset to the factory
settings 8
You can restore all the Scan to Media settings
(Quality and File Type), that you have
changed, to the factory settings.
a Press (SCAN).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Factory Reset. Press OK and 1 to
choose Yes.
d Press Stop/Exit.

Brother MFC-J270w Specifications

General

Brand	Brother
Model	MFC-J270w
Category	All in One Printer
Language	English